Rabu, 2 Jun 2010

June 2, 2010 Cab Forward DCC Wiring Diagrams

online club This is my DCC wiring diagram for my five Rivarossi AC-12 Cab Forwards.  They are a newer version that came from the factory with both right and left rail power pickup in the locomotive.  My five older AC-10 & 11 Cab forwards have single rail power pickup, right rail in the locomotive and left rail in the tender.  I replaced all my Rivarossi tender trucks with brass Buckeye trucks for more reliable twelve wheel power pickup. 

Posted by Picasa
This works out very good, the new Faulhaber Neodymium Magnet Motors are very powerful and they draw less than 500 ma. from the decoder under full load.

This is my diagram of the older Rivarossi AC-10 & AC-11 with tender power pickup.


Important information:

First: For those that are using the Rivarossi motor you must isolate the motor wiring from the frame for DCC operation!

Second: The Rivarossi motor will draw in access of one Amp easily under load, make sure that your DCC decoder will handle 1� Amps!  
Hasil gambar untuk model train for beginner
Dicatat oleh di

Tiada ulasan:

Catat Ulasan

Langgan: Catat Ulasan (Atom)